This International Standard is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products. It specifies a test method for determining the specular gloss of paint films using a reflectometer geometry of 20”, 60” or 85’. The method is not suitable for the measurement of the gloss of metallic paints. a) The 60” geometry is applicable to all paint films, but for very high gloss and near-matt films 20” or 85" may be more suitable. b) The 20” geometry, which uses a smaller receptor aperture, is intended to give improved differentiation between high-gloss paint films (i.e. films with a 60” specular gloss higher than about 70 units). c) The 85” geometry is intended to give improved differentiation between low-gloss paint films (i.e. films with a 60” specular gloss lower than about 10 units). NOTES 1 - The same geometry should, of course, be retained for a series of measurements even if this means disregarding the suggested limits. 2 - In some cases, the determination of specular gloss may not correspond to a visual assessment.