Standard Svensk standard · SS-EN ISO 7765-1:2004

Plast - Film och folie - Bestämning av slaghållfasthet med fallande dommetoden - Del 1: Trappstegsmetoder (ISO 7765-1:1988)

Status: Gällande

Köp denna standard

Standard Svensk standard · SS-EN ISO 7765-1:2004

Plast - Film och folie - Bestämning av slaghållfasthet med fallande dommetoden - Del 1: Trappstegsmetoder (ISO 7765-1:1988)
Prenumerera på standarden - Läs mer Dölj
Pris: 735 SEK
standard ikon pdf

PDF

Pris: 735 SEK
standard ikon

Papper

Pris: 1 176 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ
Provläs denna standard
Omfattning
1.1 This part of ISO 7765 specifies methods for the determination of the energy that causes plastics film and sheet less than 1 mm in thickness to fail under specified conditions of impact of a free-falling dart from a specified height that would result in failure of 50 % ot the specimens tested.
1.2 Two methods of test are described.
1.2.1 Method A employs a dart with a 38 mm ± 1 mm diameter hemispherical head dropped from a height of 0,66 m ± 0,01 m. This method may be used for materials whose impact resistance requires masses of about 0,05 kg to about 2 kg to fracture them.
1.2.2 Method B employs a dart with a 50 mm ± 1 mm diameter hemispherical head dropped from a height of 1,50 m ± 0,01 m. Its range of applicability is from about 0,3 kg to about 2 kg.
1.3 The measurement technique is the staircase method. A uniform missile mass increment is employed during testing and the missile weight is decreased or increased by the uniform increment after test of each specimen, depending upon the result (failure or no failure) observed for the specimen.

Ämnesområden

Film och ark (83.140.10)


Köp denna standard

Standard Svensk standard · SS-EN ISO 7765-1:2004

Plast - Film och folie - Bestämning av slaghållfasthet med fallande dommetoden - Del 1: Trappstegsmetoder (ISO 7765-1:1988)
Prenumerera på standarden - Läs mer Dölj
Pris: 735 SEK
standard ikon pdf

PDF

Pris: 735 SEK
standard ikon

Papper

Pris: 1 176 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ

Produktinformation

Språk: Engelska

Framtagen av: Plast, SIS/TK 156

Internationell titel: Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988)

Artikelnummer: STD-37044

Utgåva: 1

Fastställd: 2004-08-20

Antal sidor: 10